<ul><li>Lamp : 1200w discharge lamp (6500K, 750hrs life)</li><li>Approved model : GE. CSR1200S OR PHILIPS MSI1200S</li><li>Control : Automatic and DMX remote control on/off</li><li>Source<br>- Ballast : Electronic &amp; Magnetic ballast available for choice<br>- Transformer : Traditional transformer or switch mode<br>power supply available for choice</li><li>CMY color mixing system<br>- Cyan, Magenta, Yellow : 0-100% + offset adjustment</li><li>Color wheel : 4 dichroic filters + open. 5600k and<br>3200k CTO UV filter (black light) color wheel continuous<br>rotation, with rainbow effect</li><li>Effect wheel : Beam shape adjustment 00-1800, frost filter</li><li>Strobe : Separating shutter for black out and variable strobing<br>1-10 fls per sec. Preprogrammed Macro with pulse effect</li><li>Dimmer : 0-100% linear dimmer</li><li>Zoom : 200mm fresnel lens with 160 - 280 zoom</li><li>X/Y movement range : Pan 540 / tilt 280 , automatic pan/<br>tilt positioning correction. X/Y speed adjustment and Preprogrammed<br>Macro effect</li><li>X/Y resolution : 8/16 bit</li><li>Reset : By console or panel</li><li>AC supply<br>Magnetic ballast : 210/230/245v/50hz 208/230v/60hz<br>Electronic ballast : 100/120/210/230/250v 50/60hz<br>Power Consumption : 1700w</li><li>Control and Programming<br>signal output : Pin1 GND, pin2(-),pin(+). Display : LCD graphic<br>with shuttle wheel. Protocol : USITT DMX-512. DMX Channel :<br>18/22CH. Signal input : 3-pin&amp;5-pin XLR male.<br>Signal output : 3-pin&amp;5-pin XLR female<br></li></ul>